Usb isolator how to#

Note: The 1067 - PhidgetStepper Bipolar HC is already isolated, and does not need a 3060.

Select the proper USB speed for your motor controller, using the toggle switch.

Connect the Motor Controller to the USB typ A connector on the USB Isolator board using a USB or mini-USB cable depending on the board revision of your motor controller.

Connect the USB Isolator to your PC using a mini-USB cable.ġ061 - PhidgetAdvancedServo 8-Motor (Full speed)ġ062 - PhidgetStepper Unipolar 4-Motor (Full speed)ġ063 - PhidgetStepper Bipolar 1-Motor (Full speed)ġ064 - PhidgetMotorControl HC (Low Speed)ġ066 - PhidgetAdvancedServo 1-Motor (Full Speed).

Select USB full speed, using the toggle switch.

Connect the InterfaceKit to the USB typ A connector on the USB Isolator board using a USB or mini-USB cable depending on the board version of your InterfaceKit.

Connect the Relay Board to a 1018 - PhidgetInterfaceKit Board.

Connect the USB ISolator to your PC using a mini-USB cable.

Select USB low speed using the toggle switch.

Connect the InterfaceKit to the USB type A connector on the USB Isolator board using a USB or mini-USB cable depending on the board version of your InterfaceKit.

Usb isolator how to#

Here are some examples showing how to connect the USB Isolator.ġ014 - PhidgetInterfaceKit 0/0/4 (Low Speed) The USB Isolator can also be used to eliminate problems caused by ground “voltage” differences between USB Host and USB devices.

etc is subject to potentially harmful voltage flowing into your PC. Any system that includes external power supplies, motors. Using the isolator you can protect your PC from relays, motor controllers, LED controllers, etc. The isolator is inserted between the Phidgets board and your PC. The USB Isolator is designed to protect your PC from harmful voltage that can flow from attached devices to your PC through the USB cable. 2.1 Improving System Stability through Isolation.